Want to prolong Small crane Service life and so small crane maintenance work must be done, to ensure the maintenance to the machine parts, reduce the wastage of the machine can fundamentally to extend the service life of small crane.Here small make up to you to introduce the small crane remain idle for a long time how to maintain:
-
Can't remember standing outside or in low-lying park, avoid because of the rain or water rust corrosion of metal parts.Park as far as possible in the dry room, when the ground of the park to try to choose a flat ground.If metal ribbon should be spread wood on the ground, step families science and technology in the production of small crane the rubber tracks can need not wood.Park should be done well after the dust protection, such as cover with cover cloth or plastic tarps.
-
If is idle for a long time, in front of the store should be carried out on the small crane maintenance, repair or replace damaged parts and a thorough cleaning, to ensure that its technology to be in good condition, can be enabled at any time.
-
If there are more than machinery and equipment in a place to park, so pay attention to when parking arrangement and decorate, make sure that any a mechanical device to access will not receive the influence of other machinery.
-
After parking should be small crane the throttle control lever in the idle position, the lever to come the initial position.
-
Within attention should be paid to put off the engine after parking of cooling water, avoid long-term soaking in water tank rust.And to replace the engine oil, the oil can be neutral not everyone metal parts of the engine.Fuel tank filled with oil, to avoid air no rust, if condition operation also should add preservatives.During downtime should start every 1 to 2 months a time machine, short form, build a new oil film making various parts lubrication, prevent rust.(remember that must be filled with water before start, at the end of the cooling water must be empty)
-
Park after remember to remove the battery, the battery placed in the interior of the freeze drying, and to keep clean and dry on the surface of the battery, bear in mind that conducting objects can not be placed on the battery.When removing the battery, the need to cut the cathode lines, and then in the positive line cut off, when installation, on the other hand, namely the positive line connection, first connect the cathode line again.For engineering mechanical electrical system is the cathode contact iron, this is to prevent when disassembling battery caused by short circuit, damage to the battery.Note if is lead-acid battery charging once a month.
-
Must pay attention to the inspection before storage, appearance to fill paint antirust paint falls off, if the paint off the area is large, you can make the machine spray paint again.In the small crane bare work to butter, rust preventive measures.Such as hook, hoist rope, highly restricted heavy hammer, etc.
Small crane maintenance is very important during idle, maintain good your small crane will reduce the risk of failure when using again, too few maintenance costs, prolong service life.
Zhengzhou Kebu Technology Co.,Ltd.. Is China's domestic engaged in the narrow space with mini crawler crane production research of professional manufacturers.Company production of mini crawler crane with independent intellectual property rights, patent number: ZL 2009 2009 X.And has a number of mini crawler crane patent production technology.Products are mainly used in the narrow space of the car engine workshop equipment maintenance, electric power maintenance, chemical workshop maintenance, building curtain wall installation, the construction of the high speed rail station, and cemetery stone industry situations in the narrow space.If you are interested in our products, please contact us, the hotline: 0371-6371, 6261
